Terminali102SIQG40ES
SNODO SKF SIQG 40 ES
Terminali
Description
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The inner ring is extended on both sides. The bearing requires maintenance and can be relubricated via grease fitting in the housing and for sizes 16 and larger also via the shaft. The female thread is available with a left- (prefix SIL) or right-hand thread.
- Easy to relubricate
- Suitable for heavy static, alternating or impact loads
- Simple and ready-to-mount
- Slotted shank with clamping screws
- Suitable for hydraulic cylinders
- Bearing can be exchanged
Key data
Terminali- Basic dynamic load rating
- 100kN
- Basic static load rating
- 176kN
- Width of inner ring
- 40mm
- Bore diameter, bearing inner ring
- 40mm
- Centre height, housing (from end of shank)
- 97mm
- Housing length, total
- 146.5mm
Item details
- Item
- 102SIQG40ES
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
26 specifications · highlighted (yellow border): used as catalog filters
| Width of inner ring | 40mm |
|---|---|
| Bore diameter | 40 |
| Bore diameter, bearing inner ring | 40mm |
| Centre height, housing (from end of shank) | 97mm |
| Outside diameter, housing eye | 91.5mm |
| Width, bearing inner ring | 40mm |
| Width, housing eye | 34mm |
| Height shank end face - centre rod end eye | 97mm |
| Basic dynamic load rating | 100kN |
|---|---|
| Basic static load rating | 176kN |
| Tightening torque bolt with internal hexagon | 48N·m |
| Sealing | Without |
|---|---|
| Material, housing | Steel |
| Attachment feature, rod end shank | Filettatura femmina destra e viti di fissaggio |
| Housing length, total | 146.5mm |
| Sliding contact surface combination | Acciaio su acciaio, standard |
| Thread designation | M 33x2 |
| Material, inner ring | Acciaio per cuscinetti |
| Material, outer ring | Acciaio per cuscinetti |
| Maintenance | Necessaria rilubrificazione |
| Size bolt with internal hexagon | M 10 |
| Material constant | 330 |
| Specific dynamic load factor | 100N/mm² |
| Angle of tilt | 4° |
| UNSPSC code | 31171508 |
|---|---|
| EClass code | 23-05-01-05 |