Terminali102SILKAC18M
SNODO SKF SILKAC 18 M
Terminali
Description
These SKF rod ends contain a spherical plain bearing with a steel/bronze sliding contact surface combination. The bearing requires maintenance, sizes 6 and larger can be relubricated via a grease fitting in the housing and via the shank. The female thread is available with a left- (prefix SIL) or right-hand thread.
- Suitable where lubricant starvation might occur
- Simple and ready-to-mount
- Easy to relubricate (sizes ≥ 6)
Key data
Terminali- Basic dynamic load rating
- 26kN
- Basic static load rating
- 35.5kN
- Width of inner ring
- 23mm
- Bore diameter, bearing inner ring
- 18mm
- Centre height, housing (from end of shank)
- 71mm
- Housing length, total
- 95mm
Item details
- Item
- 102SILKAC18M
- Category
- A.05
- Unit of measure
- PZ
Technical specifications
23 specifications · highlighted (yellow border): used as catalog filters
| Width of inner ring | 23mm |
|---|---|
| Bore diameter | 18 |
| Bore diameter, bearing inner ring | 18mm |
| Centre height, housing (from end of shank) | 71mm |
| Outside diameter, housing eye | 47mm |
| Width, bearing inner ring | 23mm |
| Width, housing eye | 17.5mm |
| Height shank end face - centre rod end eye | 71mm |
| Basic dynamic load rating | 26kN |
|---|---|
| Basic static load rating | 35.5kN |
| Sliding contact surface combination | Acciaio-bronzo |
|---|---|
| Maintenance | Necessaria rilubrificazione |
| Thread designation | M 18x1.5 |
| Attachment feature, rod end shank | Filettatura femmina sinistra |
| Sealing | Without |
| Material, housing | Steel |
| Housing length, total | 95mm |
| Material, inner ring | Acciaio per cuscinetti |
| Material constant | 330 |
| Specific dynamic load factor | 50N/mm² |
| Angle of tilt | 15° |
| UNSPSC code | 31171508 |
|---|---|
| EClass code | 23-05-01-05 |