Terminali102SI30C
SNODO SKF SI 30 C
Terminali
Description
These SKF rod ends contain a spherical plain bearing with a steel/PTFE sintered bronze contact surface combination. The bearing is maintenance-free. The female thread is available with a left- (prefix SIL) or right-hand thread.
- Long service life
- Maintenance-free
- Suitable for heavy, constant direction loads
- Low coefficient of friction
- Simple and ready-to-mount
Key data
Terminali- Basic dynamic load rating
- 65.5kN
- Basic static load rating
- 139kN
- Width of inner ring
- 22mm
- Bore diameter, bearing inner ring
- 30mm
- Centre height, housing (from end of shank)
- 110mm
- Housing length, total
- 149mm
Item details
- Item
- 102SI30C
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
24 specifications · highlighted (yellow border): used as catalog filters
| Width of inner ring | 22mm |
|---|---|
| Bore diameter | 30 |
| Bore diameter, bearing inner ring | 30mm |
| Centre height, housing (from end of shank) | 110mm |
| Outside diameter, housing eye | 75mm |
| Width, bearing inner ring | 22mm |
| Width, housing eye | 20mm |
| Height shank end face - centre rod end eye | 110mm |
| Basic dynamic load rating | 65.5kN |
|---|---|
| Basic static load rating | 139kN |
| Sealing | Without |
|---|---|
| Material, housing | Steel |
| Attachment feature, rod end shank | Filettatura femmina destra |
| Housing length, total | 149mm |
| Sliding contact surface combination | Acciaio-bronzo sinterizzato composito |
| Thread designation | M 30x2 |
| Material, inner ring | Acciaio per cuscinetti |
| Material, outer ring | Acciaio per imbutitura profonda |
| Maintenance | Esente da manutenzione |
| Material constant | 1,400 |
| Specific dynamic load factor | 100N/mm² |
| Angle of tilt | 6° |
| UNSPSC code | 31171508 |
|---|---|
| EClass code | 23-05-01-05 |