Terminali102SI17ES
SNODO SKF SI 17 ES
Terminali
Description
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The bearing requires maintenance and can be relubricated via a lubrication hole in the housing and via the shaft. The female thread is available with a left- (prefix SIL) or right-hand thread.
- Suitable for heavy static, alternating or impact loads
- Simple and ready-to-mount
- Easy to relubricate
Key data
Terminali- Basic dynamic load rating
- 21.2kN
- Basic static load rating
- 44kN
- Width of inner ring
- 14mm
- Bore diameter, bearing inner ring
- 17mm
- Centre height, housing (from end of shank)
- 67mm
- Housing length, total
- 92mm
Item details
- Item
- 102SI17ES
- Category
- A.05
- Unit of measure
- PZ
Technical specifications
24 specifications · highlighted (yellow border): used as catalog filters
| Width of inner ring | 14mm |
|---|---|
| Bore diameter | 17 |
| Bore diameter, bearing inner ring | 17mm |
| Centre height, housing (from end of shank) | 67mm |
| Outside diameter, housing eye | 47mm |
| Width, bearing inner ring | 14mm |
| Width, housing eye | 11.5mm |
| Height shank end face - centre rod end eye | 67mm |
| Basic dynamic load rating | 21.2kN |
|---|---|
| Basic static load rating | 44kN |
| Sliding contact surface combination | Acciaio su acciaio, standard |
|---|---|
| Maintenance | Necessaria rilubrificazione |
| Thread designation | M 16 |
| Attachment feature, rod end shank | Filettatura femmina destra |
| Sealing | Without |
| Material, housing | Steel |
| Housing length, total | 92mm |
| Material, inner ring | Acciaio per cuscinetti |
| Material, outer ring | Acciaio per cuscinetti |
| Material constant | 330 |
| Specific dynamic load factor | 100N/mm² |
| Angle of tilt | 10° |
| UNSPSC code | 31171508 |
|---|---|
| EClass code | 23-05-01-05 |