Terminali102SCF25ES
TERMINALE SKF SCF 25 ES
Terminali
Description
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The bearing requires maintenance and can be relubricated via a grease fitting in the housing and via the shaft. The housing with the rectangular section welding shank enables heavy static loads.
- Suitable for heavy static, alternating or impact loads
- Easy to relubricate
- Bearing can be exchanged
Key data
Terminali- Basic dynamic load rating
- 48kN
- Basic static load rating
- 65.5kN
- Width of inner ring
- 20mm
- Bore diameter, bearing inner ring
- 25mm
- Centre height, housing (from end of shank)
- 45mm
- Housing length, total
- 74mm
Item details
- Item
- 102SCF25ES
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
23 specifications · highlighted (yellow border): used as catalog filters
| Width of inner ring | 20mm |
|---|---|
| Bore diameter | 25 |
| Bore diameter, bearing inner ring | 25mm |
| Centre height, housing (from end of shank) | 45mm |
| Outside diameter, housing eye | 56.5mm |
| Width, bearing inner ring | 20mm |
| Width, housing eye | 24mm |
| Height shank end face - centre rod end eye | 45mm |
| Basic dynamic load rating | 48kN |
|---|---|
| Basic static load rating | 65.5kN |
| Sealing | Without |
|---|---|
| Material, housing | Steel |
| Attachment feature, rod end shank | Sezione rettangolare, per saldatura |
| Housing length, total | 74mm |
| Sliding contact surface combination | Acciaio su acciaio, standard |
| Material, inner ring | Acciaio per cuscinetti |
| Material, outer ring | Acciaio per cuscinetti |
| Maintenance | Necessaria rilubrificazione |
| Material constant | 330 |
| Specific dynamic load factor | 100N/mm² |
| Angle of tilt | 7° |
| UNSPSC code | 31171508 |
|---|---|
| EClass code | 23-05-01-05 |