Terminali102SC35ES
SNODO A SALDARE SKF SC 35 ES
Terminali
Description
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The bearing requires maintenance and can be relubricated via a lubrication hole or grease fitting in the housing and via the shaft. The dowel pin eases centring at the cylindrical section welding shank.
- Suitable for heavy static, alternating or impact loads
- Easy to relubricate
- Easy to center
Key data
Terminali- Basic dynamic load rating
- 80kN
- Basic static load rating
- 112kN
- Width of inner ring
- 25mm
- Bore diameter, bearing inner ring
- 35mm
- Centre height, housing (from end of shank)
- 61mm
- Housing length, total
- 104mm
Item details
- Item
- 102SC35ES
- Category
- A.05
- Unit of measure
- PZ
Technical specifications
23 specifications · highlighted (yellow border): used as catalog filters
| Width of inner ring | 25mm |
|---|---|
| Bore diameter | 35 |
| Bore diameter, bearing inner ring | 35mm |
| Centre height, housing (from end of shank) | 61mm |
| Outside diameter, housing eye | 84mm |
| Width, bearing inner ring | 25mm |
| Width, housing eye | 22mm |
| Height shank end face - centre rod end eye | 61mm |
| Basic dynamic load rating | 80kN |
|---|---|
| Basic static load rating | 112kN |
| Sliding contact surface combination | Acciaio su acciaio, standard |
|---|---|
| Maintenance | Necessaria rilubrificazione |
| Attachment feature, rod end shank | Sezione cilindrica, con spina di posizionamento, per saldatura |
| Sealing | Without |
| Material, housing | Steel |
| Housing length, total | 104mm |
| Material, inner ring | Acciaio per cuscinetti |
| Material, outer ring | Acciaio per cuscinetti |
| Material constant | 330 |
| Specific dynamic load factor | 100N/mm² |
| Angle of tilt | 6° |
| UNSPSC code | 31171508 |
|---|---|
| EClass code | 23-05-01-05 |