Terminali102SAL30ES
SNODO SKF SAL 30 ES
Terminali
Description
These SKF rod ends contain a spherical plain bearing with a steel/steel sliding contact surface combination. The bearing requires maintenance and can be relubricated via a grease fitting in the housing and via the shaft. The male thread is available with a left- (prefix SAL) or a right-hand thread. Some sizes have different fitting dimensions (SAA series).
- Suitable for heavy static, alternating or impact loads
- Simple and ready-to-mount
- Easy to relubricate
Key data
Terminali- Basic dynamic load rating
- 62kN
- Basic static load rating
- 81.5kN
- Width of inner ring
- 22mm
- Bore diameter, bearing inner ring
- 30mm
- Centre height, housing (from end of shank)
- 110mm
- Housing length, total
- 149mm
Item details
- Item
- 102SAL30ES
- Category
- A.05
- Unit of measure
- PZ
Technical specifications
24 specifications · highlighted (yellow border): used as catalog filters
| Width of inner ring | 22mm |
|---|---|
| Bore diameter | 30 |
| Bore diameter, bearing inner ring | 30mm |
| Centre height, housing (from end of shank) | 110mm |
| Outside diameter, housing eye | 75mm |
| Width, bearing inner ring | 22mm |
| Width, housing eye | 20mm |
| Height shank end face - centre rod end eye | 110mm |
| Basic dynamic load rating | 62kN |
|---|---|
| Basic static load rating | 81.5kN |
| Sliding contact surface combination | Acciaio su acciaio, standard |
|---|---|
| Maintenance | Necessaria rilubrificazione |
| Thread designation | M 30x2 |
| Attachment feature, rod end shank | Filettatura maschio sinistra |
| Sealing | Without |
| Material, housing | Steel |
| Housing length, total | 149mm |
| Material, inner ring | Acciaio per cuscinetti |
| Material, outer ring | Acciaio per cuscinetti |
| Material constant | 330 |
| Specific dynamic load factor | 100N/mm² |
| Angle of tilt | 6° |
| UNSPSC code | 31171508 |
|---|---|
| EClass code | 23-05-01-05 |