Terminali102SA40TXE2LS
SNODO SKF SA 40 TXE-2LS
Terminali
Description
These SKF rod ends contain a spherical plain bearing with a steel/PTFE fabric sliding contact surface combination and a triple-lip, heavy duty contact seal on both sides. The bearing is maintenance-free. The male thread is available with a left- (prefix SAL) or right-hand thread. Some sizes have different fitting dimensions (SA(L)A series).
- Long service life
- Maintenance-free
- Suitable for very heavy, constant direction loads
- Low coefficient of friction
- Simple and ready-to-mount
Key data
Terminali- Basic dynamic load rating
- 280kN
- Basic static load rating
- 140kN
- Width of inner ring
- 28mm
- Bore diameter, bearing inner ring
- 40mm
- Centre height, housing (from end of shank)
- 145mm
- Housing length, total
- 194mm
Item details
- Item
- 102SA40TXE2LS
- Category
- A.05
- Unit of measure
- PZ
Technical specifications
24 specifications · highlighted (yellow border): used as catalog filters
| Width of inner ring | 28mm |
|---|---|
| Bore diameter | 40 |
| Bore diameter, bearing inner ring | 40mm |
| Centre height, housing (from end of shank) | 145mm |
| Outside diameter, housing eye | 94mm |
| Width, bearing inner ring | 28mm |
| Width, housing eye | 24mm |
| Height shank end face - centre rod end eye | 145mm |
| Basic dynamic load rating | 280kN |
|---|---|
| Basic static load rating | 140kN |
| Sliding contact surface combination | Acciaio-tessuto PTFE |
|---|---|
| Maintenance | Esente da manutenzione |
| Thread designation | M 42x3 |
| Attachment feature, rod end shank | Filettatura maschio destra |
| Sealing | Seal on both sides |
| Sealing type | Triple-lip |
| Material, housing | Steel |
| Housing length, total | 194mm |
| Material, inner ring | Acciaio per cuscinetti |
| Material, outer ring | Acciaio per cuscinetti |
| Specific dynamic load factor | 300N/mm² |
| Angle of tilt | 6° |
| UNSPSC code | 31171508 |
|---|---|
| EClass code | 23-05-01-05 |