Tenute radiali per alberi031MVA9513012
PARAOLIO VITON 95X130X12
Tenute radiali per alberi
Description
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
Key data
Tenute radiali per alberi- Shaft diameter
- 95mm
- Seal width
- 12mm
- Minimum operating temperature
- -25°C
- Maximum operating temperature
- 200°C
- Permissible circumferential speed
- 32m/s
- Limiting speed
- 6,540r/min
Item details
- Item
- 031MVA9513012
- Category
- G.01
- Unit of measure
- PZ
Technical specifications
17 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 95mm |
|---|---|
| Seal width | 12mm |
| Type of outside diameter | Involucro in metallo con rivestimento sigillante sul diametro esterno |
| Metric/inch series | Dimensioni metriche |
| Permissible circumferential speed | 32m/s |
|---|---|
| Limiting speed | 6,540r/min |
| Rotational speed | 6,540r/min |
| Pressure differential (max.) | 0.07N/mm² |
| Sealing lip material | Gomma al fluoro (FKM) |
|---|---|
| Auxiliary lip | No |
| Minimum operating temperature | -25°C |
| Maximum operating temperature | 200°C |
| Unit system | Metric |
| Seal design | CRW1 |
| Lip material | Gomma al fluoro (FKM) |
| UNSPSC code | 31181602 |
|---|---|
| EClass code | 23-07-08-01 |