Tenute radiali per alberi031MVA7210010AS
PARAOLIO VITON 72X100X10 HMSA10 V AS CON LABBRO PARAPOLVERE
Tenute radiali per alberi
Description
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
- High pumping rate
- Higher contamination exclusion with dust lip
- With garter spring
- Accommodate misalignment
Key data
Tenute radiali per alberi- Shaft diameter
- 72mm
- Seal width
- 10mm
- Minimum operating temperature
- -25°C
- Maximum operating temperature
- 200°C
- Permissible circumferential speed
- 29.3m/s
- Limiting speed
- 7,740r/min
Item details
- Item
- 031MVA7210010AS
- Category
- G.01
- Unit of measure
- PZ
Technical specifications
19 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 72mm |
|---|---|
| Seal width | 10mm |
| Type of outside diameter | Gomma rinforzata in metallo |
| Metric/inch series | Dimensioni metriche |
| Permissible circumferential speed | 29.3m/s |
|---|---|
| Limiting speed | 7,740r/min |
| Rotational speed | 7,740r/min |
| Pressure differential (max.) | 0.05N/mm² |
| Sealing lip material | Gomma al fluoro (FKM) |
|---|---|
| Auxiliary lip | Sì |
| Minimum operating temperature | -25°C |
| Maximum operating temperature | 200°C |
| Unit system | Metric |
| Seal design | HMSA10 |
| Lip material | Gomma al fluoro (FKM) |
| Operating temperature, short periods (max.) | 200°C |
| UNSPSC code | 31181602 |
|---|---|
| EClass code | 23-07-08-01 |
| Compliance with standard | ISO 6194, DIN 3760 |