Tenute radiali per alberi031MVA6010010AS
PARAOLIO VITON 60X100X10 HMSA10V AS CON LABBRO PARAPOLVERE(NB)
Tenute radiali per alberi
Description
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
- High pumping rate
- Higher contamination exclusion with dust lip
- With garter spring
- Accommodate misalignment
Key data
Tenute radiali per alberi- Shaft diameter
- 60mm
- Seal width
- 10mm
- Minimum operating temperature
- -25°C
- Maximum operating temperature
- 200°C
- Permissible circumferential speed
- 27.2m/s
- Limiting speed
- 8,700r/min
Item details
- Item
- 031MVA6010010AS
- Category
- G.01
- Unit of measure
- PZ
Technical specifications
19 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 60mm |
|---|---|
| Seal width | 10mm |
| Type of outside diameter | Gomma rinforzata in metallo |
| Metric/inch series | Dimensioni metriche |
| Permissible circumferential speed | 27.2m/s |
|---|---|
| Limiting speed | 8,700r/min |
| Rotational speed | 8,700r/min |
| Pressure differential (max.) | 0.05N/mm² |
| Sealing lip material | Gomma al fluoro (FKM) |
|---|---|
| Auxiliary lip | Sì |
| Minimum operating temperature | -25°C |
| Maximum operating temperature | 200°C |
| Unit system | Metric |
| Seal design | HMSA10 |
| Lip material | Gomma al fluoro (FKM) |
| Operating temperature, short periods (max.) | 200°C |
| UNSPSC code | 31181602 |
|---|---|
| EClass code | 23-07-08-01 |
| Compliance with standard | ISO 6194, DIN 3760 |