Cuscinetti per unità021YET212
CUSCINETTO X SUPP. SKF YET 212 (GRAE60NPPB/SA212)
Cuscinetti per unità · 60 × 110 × 36.7 mm
Description
Insert bearings are based on sealed deep groove ball bearings. This variant is intended for use in applications where the direction of rotation is constant. It has a narrow inner ring extended on one side, with an eccentric locking collar, enabling quick and easy mounting onto the shaft.
- Designed for rotation in one direction
- Quick and easy to mount onto the shaft
- Long service life
- Reduce noise and vibration levels
Key data
Cuscinetti per unità- Shaft diameter
- 60mm
- Basic dynamic load rating
- 52.7kN
- Fatigue load limit
- 1.53kN
- Limiting speed
- 3,400r/min
- Basic static load rating
- 36kN
- Outside diameter
- 110mm
Item details
- Item
- 021YET212
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
35 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 60mm |
|---|---|
| Outside diameter | 110mm |
| Bore diameter | 60mm |
| Width outer ring | 26mm |
| Width, outer ring | 26mm |
| Width, total | 52.6mm |
| Outer diameter of inner ring ≈ | 75.64mm |
| Chamfer dimension of inner ring (min.) | 1.5mm |
| Width of inner ring | 36.7mm |
| Width, inner ring | 36.7mm |
| Distance from locking device side face to raceway centre | 39.6 |
| Overall bearing width | 52.6 |
| Basic dynamic load rating | 52.7kN |
|---|---|
| Fatigue load limit | 1.53kN |
| Limiting speed | 3,400r/min |
| Basic static load rating | 36kN |
| Recommended tightening torque for set screw | 16.5 |
| Retaining feature, inner ring | Eccentric collar |
|---|---|
| Relubrication feature | With |
| Lubricant | Grease |
| Sealing | Seal on both sides |
| Coating | Without |
| Material, bearing | Bearing steel |
| Cage | Non-metallic |
| Bore type | Cylindrical |
| Sealing type | Contact, standard |
| Rolling elements | Balls |
| Inner ring extension | On one side |
| Rubber seating ring | Without |
| Outer ring type | Spherical |
| Note | Limiting speed with shaft tolerance h6 |
| Set screw | M10x1 |
| Calculation factor | 14 |
|---|
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-08-02 |