Unità cuscinetto a sfere021WSTUC50MTPZM
SUPPORTO SKF FOOD LINE WSTUC 50M-TPZM (UCT 210)
Unità cuscinetto a sfere
Description
Take-up ball bearing units for the SKF Food Line consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a composite housing. They are strong, yet lightweight, and chemically resistant to detergents and contaminants. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening a set screw on the inner ring, that makes it easy to mount.
- Strong, yet lightweight
- Chemically resistant
- Designed for an alternating rotation
- Well suited to follow the highest food safety standards
- Reliable in wet environments
Key data
Unità cuscinetto a sfere- Basic dynamic load rating
- 35.1kN
- Basic static load rating
- 23.2kN
- Limiting speed
- 2,200r/min
- Fatigue load limit
- 0.98kN
- Shoulder diameter inner ring ≈
- 62.51mm
- Shaft diameter
- 50mm
Item details
- Item
- 021WSTUC50MTPZM
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
38 specifications
| Shoulder diameter inner ring ≈ | 62.51mm |
|---|---|
| Shaft diameter | 50mm |
| Width of inner ring | 51.6mm |
| Hexagonal key size for set screw | 5 |
| Distance from locking device side face to raceway centre | 32.6 |
| Overall length | 144 |
| Overall height | 117 |
| Distance from locking device side face to thread centre | 9 |
| Bore diameter | 50 |
| Bearing width, total | 51.6 |
| Housing overall width | 45 |
| Basic dynamic load rating | 35.1kN |
|---|---|
| Basic static load rating | 23.2kN |
| Limiting speed | 2,200r/min |
| Fatigue load limit | 0.98kN |
| Recommended tightening torque for set screw | 16.5 |
| Bore type | Cylindrical |
|---|---|
| Material, bearing | Bearing steel |
| Lubricant | Grease |
| Coating | Zinc-coated bearing |
| Retaining feature, inner ring | Set screws |
| Sealing type | Contact, gutter |
| Rubber seating ring | Without |
| Unit system | Metric |
| Note | Limiting speed with shaft tolerance h6 |
| Sealing, unit | Optional end cover |
| Set screw | M10x1 |
| Sealing type, bearing | Contact, gutter |
| Purpose specific | For food and beverage applications |
| Grease fitting | Without |
| Relubrication hole | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Material, housing | Composite for the SKF Food Line |
| Housing type | Take-up |
| Standout of end cover | 77 |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-08-02 |
| Compliance with standard | Not standardized |