Supporti per cuscinetti per unità021SYJ508
CORPO SUPPORTO SKF SYJ 508
Supporti per cuscinetti per unità
Description
Pillow (plummer) block housings are designed to accommodate an insert bearing. The cast iron housings are strong, stiff and cost-effective. They are suitable for most applications and can be bolted directly to a support surface. This variant is compliant with Japanese standards.
- Accommodate heavy loads in different directions
- Strong
- High degree of stiffness
- Narrow design
Item details
- Item
- 021SYJ508
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
21 specifications · highlighted (yellow border): used as catalog filters
| Centre distance between bolt holes | 136.5 |
|---|---|
| Housing overall width | 49 |
| Recommended diameter for attachment bolts, inch | 0.5625 |
| Recommended diameter for attachment bolts, mm | 14 |
| Overall length | 184 |
| Recommended diameter for dowel pins | 4 |
| Hexagonal key size for the grease fitting | 7 |
| Diameter of head sphere of grease fitting | 6.5 |
| Base width | 49 |
| Housing type | Pillow block, normal base |
|---|---|
| Material, housing | Cast iron |
| Number of bolt holes for fasteners | 2 |
| Grease fitting | With |
| Coating | Without |
| Relubrication hole | With |
| Fastening bolt hole type | Plain |
| Thread of grease fitting | 1/4-28 SAE-LT |
| Axial offset of dowel pins | 17.5 |
| Axial position of the housing thread | 3.5 |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-16-02 |