Supporti per cuscinetti per unità021SY512
SUPPORTO SKF SY 512 M
Supporti per cuscinetti per unità
Description
Pillow (plummer) block housings are designed to accommodate an insert bearing. The cast iron housings are strong, stiff and cost-effective. They are suitable for most applications and can be bolted directly to a support surface.
- Accommodate heavy loads in different directions
- High degree of stiffness
- Narrow design
Item details
- Item
- 021SY512
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
22 specifications · highlighted (yellow border): used as catalog filters
| Centre distance between bolt holes | 190.5 |
|---|---|
| Housing overall width | 60 |
| Recommended diameter for attachment bolts, inch | 0.625 |
| Recommended diameter for attachment bolts, mm | 16 |
| Overall length | 240 |
| Recommended diameter for dowel pins | 4 |
| Hexagonal key size for the grease fitting | 7 |
| Diameter of head sphere of grease fitting | 6.5 |
| Base width | 60 |
| Housing type | Pillow block, normal base |
|---|---|
| Material, housing | Cast iron |
| Number of bolt holes for fasteners | 2 |
| Grease fitting | With |
| Coating | Without |
| Relubrication hole | With |
| Fastening bolt hole type | Plain |
| Standout of end cover | 39 |
| Thread of grease fitting | 1/4-28 SAE-LT |
| Axial offset of dowel pins | 21 |
| Axial position of the housing thread | 5.5 |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-08-02 |