Unità cuscinetto a sfere021P2BSS40MTPSS
SUPPORTO SKF P2BSS 40M-TPSS
Unità cuscinetto a sfere
Description
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a stainless-steel housing. They have a good corrosion resistance, and are suitable for applications with both constant and alternating directions of rotation. They have an inner ring extended on both sides and are locked onto the shaft by tightening a set screw on the inner ring, making them easy to mount.
- Ready to mount
- Designed for a constant and alternating rotation
- Good corrosion resistance
- Lubricated and sealed bearing
- Quick locking onto the shaft
Key data
Unità cuscinetto a sfere- Shaft diameter
- 40mm
- Centre height (pillow block)
- 49.2mm
- Basic dynamic load rating
- 24.7kN
- Fatigue load limit
- 0.8kN
- Shoulder diameter inner ring ≈
- 51.8mm
- Limiting speed
- 2,800r/min
Item details
- Item
- 021P2BSS40MTPSS
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
49 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 40mm |
|---|---|
| Centre height (pillow block) | 49.2mm |
| Centre distance between bolt holes | 135.7 |
| Attachment bolt diameter | 12 |
| Housing overall width | 42 |
| Shoulder diameter inner ring ≈ | 51.8mm |
| Width of inner ring | 49.2mm |
| Recommended diameter for attachment bolts, inch | 0.5 |
| Recommended diameter for attachment bolts, mm | 12 |
| Hexagonal key size for set screw | 4 |
| Distance from locking device side face to raceway centre | 30.2 |
| Diameter of attachment bolt hole | 14.5 |
| Overall length | 174.5 |
| Distance from locking device side face to thread centre | 10 |
| Width including end cover | 77.9 |
| Bore diameter | 40 |
| Bearing width, total | 49.2 |
| Base width | 42 |
| Height of spherical seat centre | 49.2mm |
| Foot height | 19mm |
| Groove height for backseal | 6.2mm |
| Basic dynamic load rating | 24.7kN |
|---|---|
| Fatigue load limit | 0.8kN |
| Limiting speed | 2,800r/min |
| Basic static load rating | 19kN |
| Recommended tightening torque for set screw | 6.5 |
| Housing type | Pillow block, normal base |
|---|---|
| Material, housing | Stainless steel |
| Number of bolt holes for fasteners | 2 |
| Retaining feature, inner ring | Set screws |
| Sealing, unit | Optional end cover |
| Grease fitting | Without |
| Unit system | Metric |
| Lubricant | Grease |
| Coating | Without |
| Material, bearing | Stainless steel |
| Bore type | Cylindrical |
| Sealing type | Contact, gutter |
| Rubber seating ring | Without |
| Note | Limiting speed with shaft tolerance h6 |
| Set screw | M8x1 |
| Sealing type, bearing | Contact, gutter |
| Purpose specific | For food and beverage applications |
| Relubrication hole | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Fastening bolt hole type | Plain |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-08-02 |
| Compliance with standard | Not standardized |