Unità cuscinetto a sfere021FYTWK25YTH
SUPPORTO SKF FYTWK 25 YTH
Unità cuscinetto a sfere
Description
These oval flanged ball bearing units are designed especially for the food and beverage industries. They are chemical resistant, lightweight and strong. The unit consists of an insert bearing, with an extended inner ring and set screw locking, and is suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a composite housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
- Chemical resistant
- Pre-lubricated for life with a non-toxic food grade grease
- Lightweight
- Strong
Key data
Unità cuscinetto a sfere- Shaft diameter
- 25mm
- Basic dynamic load rating
- 11.9kN
- Fatigue load limit
- 0.335kN
- Limiting speed
- 4,300r/min
- Basic static load rating
- 7.8kN
- Outer diameter of inner ring ≈
- 33.74mm
Item details
- Item
- 021FYTWK25YTH
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
49 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 25mm |
|---|---|
| Centre distance between bolt holes | 99 |
| Attachment bolt diameter | 10 |
| Housing overall width | 30 |
| Outer diameter of inner ring ≈ | 33.74mm |
| Width of inner ring | 34.1mm |
| Overall width | 38.8 |
| Recommended diameter for attachment bolts, inch | 0.375 |
| Recommended diameter for attachment bolts, mm | 10 |
| Hexagonal key size for set screw | 3 |
| Distance from locking device side face to raceway centre | 19.8 |
| Diameter of attachment bolt hole | 12.3 |
| Overall length | 70 |
| Overall height | 124 |
| Top external diameter | 65 |
| Distance from locking device side face to thread centre | 5 |
| Overall bearing width | 34.1 |
| Width including end cover | 26 |
| Flange width | 15 |
| Width of housing | 30 |
| Bore diameter | 25 |
| Bearing width, total | 34.1 |
| Basic dynamic load rating | 11.9kN |
|---|---|
| Fatigue load limit | 0.335kN |
| Limiting speed | 4,300r/min |
| Basic static load rating | 7.8kN |
| Recommended tightening torque for set screw | 4 |
| Housing type | Flanged |
|---|---|
| Flanged housing type | Oval |
| Material, housing | Composite for the SKF Food Line |
| Number of bolt holes for fasteners | 2 |
| Retaining feature, inner ring | Set screws |
| Sealing, unit | Optional end cover |
| Grease fitting | Without |
| Unit system | Metric |
| Lubricant | Grease |
| Coating | Without |
| Material, bearing | Stainless steel |
| Bore type | Cylindrical |
| Sealing type | Contact, multiple |
| Rubber seating ring | Without |
| Note | Limiting speed with shaft tolerance h6 |
| Set screw | M6x0.75 |
| Sealing type, bearing | Contact, multiple |
| Purpose specific | For food and beverage applications |
| Relubrication hole | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Fastening bolt hole type | Plain |
| Compliance with standard | ISO with boundary dimension deviations |
|---|