Supporti per cuscinetti per unità021FYTB504M
FUSIONE SKF FYTB 504 M
Supporti per cuscinetti per unità
Description
These oval flanged housings for insert bearings are made of grey cast iron and can be bolted with two bolts to a machine wall or frame. They have been developed for bearing arrangements that must operate reliably in difficult environments.
- Resist high levels of contamination
- Accommodate relatively heavy loads
Item details
- Item
- 021FYTB504M
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
30 specifications
| Recommended diameter for attachment bolts, inch | 0.375 |
|---|---|
| Recommended diameter for attachment bolts, mm | 10 |
| Diameter of attachment bolt hole | 11.5 |
| Overall length | 60.5 |
| Overall height | 112 |
| Flange width | 11 |
| Centre distance between bolt holes | 90 |
| Housing overall width | 29.5 |
| Recommended diameter for dowel pins | 2 |
| Distance of dowel pins | 74 |
| Hexagonal key size for the grease fitting | 7 |
| Diameter of head sphere of grease fitting | 6.5 |
| Base external diameter | 60.5 |
| Top external diameter | 58 |
| Coating | Without |
|---|---|
| Grease fitting | With |
| Relubrication hole | With |
| Material, housing | Cast iron |
| Fastening bolt hole type | Plain |
| Number of bolt holes for fasteners | 2 |
| Flanged housing type | Oval |
| Housing type | Flanged |
| Standout of end cover | 20.5 |
| Thread of grease fitting | 1/4-28 SAE-LT |
| Axial offset of dowel pins | 11.5 |
| Axial position of the housing thread | 20 |
| Housing thread for grease fitting | 1/4-28 UNF |
| Depth of centring recess | 3.2 |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-08-02 |