Unità cuscinetto a sfere021FYTB20TF/VA228
SUPPORTO SKF PER ALTE TEMP. FYTB20 TF/VA228 (+350¡C ) (SOSTITUISCE FYT20)
Unità cuscinetto a sfere
Description
These oval flanged ball bearing units are designed for high temperature applications and are compliant with ISO standards. They consist of a high temperature insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
- Resist high levels of contamination
- Designed for high temperatures applications
- Accommodate relatively heavy loads
- Cost-effective
Key data
Unità cuscinetto a sfere- Shaft diameter
- 20mm
- Basic dynamic load rating
- 12.7kN
- Shoulder diameter inner ring ≈
- 28.2mm
- Limiting speed
- 260r/min
- Basic static load rating
- 6.55kN
- Width, total
- 37.3mm
Item details
- Item
- 021FYTB20TF/VA228
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
39 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 20mm |
|---|---|
| Centre distance between bolt holes | 90 |
| Attachment bolt diameter | 10 |
| Housing overall width | 29.5 |
| Shoulder diameter inner ring ≈ | 28.2mm |
| Width, total | 37.3mm |
| Width of inner ring | 31mm |
| Overall width | 37.3 |
| Hexagonal key size for set screw | 3 |
| Distance from locking device side face to raceway centre | 18.3 |
| Overall length | 60.5 |
| Distance from locking device side face to thread centre | 4.5 |
| Bearing width, total | 31 |
| Base external diameter | 60.5 |
| Top external diameter | 58 |
| Basic dynamic load rating | 12.7kN |
|---|---|
| Limiting speed | 260r/min |
| Basic static load rating | 6.55kN |
| Recommended tightening torque for set screw | 4 |
| Housing type | Flanged |
|---|---|
| Flanged housing type | Oval |
| Material, housing | Cast iron |
| Number of bolt holes for fasteners | 2 |
| Retaining feature, inner ring | Set screws |
| Sealing, unit | Without |
| Grease fitting | Without |
| Unit system | Metric |
| Lubricant | Solid lubricant |
| Coating | Zinc-coated housing and manganese phosphate coated bearing |
| Material, bearing | High temperature steel |
| Bore type | Cylindrical |
| Sealing type | Non-contact |
| Rubber seating ring | Without |
| Set screw | M6x0.75 |
| Relubrication hole | Without |
| Sealing, bearing | Shield and flinger on both sides |
| Fastening bolt hole type | Plain |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-90-90 |