Unità cuscinetto a sfere021FYK25TR
SUPPORTO FYK 25 TR
Unità cuscinetto a sfere
Description
These square flanged ball bearing units are compliant with ISO standards. The unit consists of an insert bearing, with an extended inner ring and set screw locking, and is suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a composite housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
- Chemical resistant
- Pre-lubricated for life
- Lightweight
- Strong
Key data
Unità cuscinetto a sfere- Shaft diameter
- 25mm
- Basic dynamic load rating
- 14kN
- Fatigue load limit
- 0.335kN
- Limiting speed
- 4,300r/min
- Basic static load rating
- 7.8kN
- Outer diameter of inner ring ≈
- 33.74mm
Item details
- Item
- 021FYK25TR
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
52 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 25mm |
|---|---|
| Centre distance between bolt holes | 70 |
| Attachment bolt diameter | 10 |
| Housing overall width | 31 |
| Outer diameter of inner ring ≈ | 33.74mm |
| Width of inner ring | 34.1mm |
| Overall width | 38.8 |
| Recommended diameter for attachment bolts, inch | 0.375 |
| Recommended diameter for attachment bolts, mm | 10 |
| Hexagonal key size for set screw | 3 |
| Distance from locking device side face to raceway centre | 19.8 |
| Diameter of attachment bolt hole | 12.3 |
| Overall length | 95 |
| Diameter of housing centering recess | 74.6 |
| Top external diameter | 65 |
| Distance from locking device side face to thread centre | 5 |
| Overall bearing width | 34.1 |
| Flange width | 15 |
| Width of housing | 31 |
| Bore diameter | 25 |
| Bearing width, total | 34.1 |
| Basic dynamic load rating | 14kN |
|---|---|
| Fatigue load limit | 0.335kN |
| Limiting speed | 4,300r/min |
| Basic static load rating | 7.8kN |
| Recommended tightening torque for set screw | 4 |
| Housing type | Flanged |
|---|---|
| Flanged housing type | Square |
| Material, housing | Composite |
| Number of bolt holes for fasteners | 4 |
| Retaining feature, inner ring | Set screws |
| Sealing, unit | Optional end cover |
| Grease fitting | Without |
| Unit system | Metric |
| Lubricant | Grease |
| Coating | Without |
| Material, bearing | Bearing steel |
| Bore type | Cylindrical |
| Sealing type | Contact, multiple |
| Rubber seating ring | Without |
| Note | Limiting speed with shaft tolerance h6 |
| Set screw | M6x0.75 |
| Sealing type, bearing | Contact, multiple |
| Purpose specific | For material handling applications |
| Relubrication hole | Without |
| Sealing, bearing | Seal and flinger on both sides |
| Fastening bolt hole type | Plain |
| Standout of end cover | 20 |
| Depth of centring recess | 3.2 |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-08-02 |
| Compliance with standard | ISO |