Supporti per cuscinetti per unità021FYJ505
FUSIONE SKF FYJ 505
Supporti per cuscinetti per unità
Description
These square flanged housings for insert bearings are complaint with Japanese Industrial Standards (JIS). They are made of grey cast iron and can be bolted with four bolts to a machine wall or frame. They have been developed for bearing arrangements that must operate reliably in difficult environments.
- Resist high levels of contamination
- Accommodate relatively heavy loads
Item details
- Item
- 021FYJ505
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
28 specifications · highlighted (yellow border): used as catalog filters
| Centre distance between bolt holes | 70 |
|---|---|
| Housing overall width | 27 |
| Recommended diameter for attachment bolts, inch | 0.375 |
| Recommended diameter for attachment bolts, mm | 10 |
| Diameter of attachment bolt hole | 12 |
| Overall length | 95 |
| Flange width | 12 |
| Recommended diameter for dowel pins | 4 |
| Distance of dowel pins | 83 |
| Hexagonal key size for the grease fitting | 7 |
| Diameter of head sphere of grease fitting | 6.5 |
| Base external diameter | 72 |
| Top external diameter | 66 |
| Housing type | Flanged |
|---|---|
| Flanged housing type | Square |
| Material, housing | Cast iron |
| Number of bolt holes for fasteners | 4 |
| Grease fitting | With |
| Coating | Without |
| Relubrication hole | With |
| Fastening bolt hole type | Plain |
| Thread of grease fitting | 1/4-28 SAE-LT |
| Axial offset of dowel pins | 19 |
| Axial position of the housing thread | 18.5 |
| Housing thread for grease fitting | 1/4-28 UNF |
| Depth of centring recess | 3.2 |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-16-02 |