Unità cuscinetto a sfere021FY60TF/VA201
SUPPORTO SKF PER ALTE TEMP. FY60 TF /VA201 (+250¡C )
Unità cuscinetto a sfere
Description
These square flanged ball bearing units are designed for high temperature applications and are compliant with ISO standards. They consist of a high temperature insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
- Resist high levels of contamination
- Designed for high temperatures and speeds
- Accommodate relatively heavy loads
- Cost-effective
Key data
Unità cuscinetto a sfere- Shaft diameter
- 60mm
- Basic dynamic load rating
- 52.7kN
- Shoulder diameter inner ring ≈
- 75.64mm
- Limiting speed
- 50r/min
- Basic static load rating
- 36kN
- Width, total
- 73.7mm
Item details
- Item
- 021FY60TF/VA201
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
37 specifications · highlighted (yellow border): used as catalog filters
| Shaft diameter | 60mm |
|---|---|
| Centre distance between bolt holes | 143 |
| Attachment bolt diameter | 16 |
| Housing overall width | 52 |
| Shoulder diameter inner ring ≈ | 75.64mm |
| Width, total | 73.7mm |
| Width of inner ring | 65.1mm |
| Hexagonal key size for set screw | 5 |
| Distance from locking device side face to raceway centre | 39.7 |
| Distance from locking device side face to thread centre | 10 |
| Bearing width, total | 65.1 |
| Base external diameter | 143 |
| Top external diameter | 130 |
| Basic dynamic load rating | 52.7kN |
|---|---|
| Limiting speed | 50r/min |
| Basic static load rating | 36kN |
| Recommended tightening torque for set screw | 16.5 |
| Housing type | Flanged |
|---|---|
| Flanged housing type | Square |
| Material, housing | Cast iron |
| Number of bolt holes for fasteners | 4 |
| Retaining feature, inner ring | Set screws |
| Sealing, unit | Without |
| Grease fitting | Without |
| Unit system | Metric |
| Lubricant | Solid lubricant |
| Coating | Zinc-coated housing and manganese phosphate coated bearing |
| Material, bearing | High temperature steel |
| Bore type | Cylindrical |
| Sealing type | Non-contact |
| Rubber seating ring | Without |
| Set screw | M10x1 |
| Relubrication hole | Without |
| Sealing, bearing | Shield and flinger on both sides |
| Fastening bolt hole type | Plain |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-90-90 |