Supporti per cuscinetti per unità021FY510
FUSIONE FY 510 M
Supporti per cuscinetti per unità
Description
These square flanged housings for insert bearings are made of grey cast iron and can be bolted with four bolts to a machine wall or frame. They have been developed for bearing arrangements that must operate reliably in difficult environments.
- Resist high levels of contamination
- Accommodate relatively heavy loads
Item details
- Item
- 021FY510
- Category
- A.08
- Unit of measure
- PZ
Technical specifications
29 specifications · highlighted (yellow border): used as catalog filters
| Centre distance between bolt holes | 111 |
|---|---|
| Housing overall width | 43 |
| Recommended diameter for attachment bolts, inch | 0.625 |
| Recommended diameter for attachment bolts, mm | 16 |
| Diameter of attachment bolt hole | 18 |
| Overall length | 143 |
| Flange width | 15 |
| Recommended diameter for dowel pins | 4 |
| Distance of dowel pins | 129 |
| Hexagonal key size for the grease fitting | 7 |
| Diameter of head sphere of grease fitting | 6.5 |
| Base external diameter | 118 |
| Top external diameter | 107 |
| Housing type | Flanged |
|---|---|
| Flanged housing type | Square |
| Material, housing | Cast iron |
| Number of bolt holes for fasteners | 4 |
| Grease fitting | With |
| Coating | Without |
| Relubrication hole | With |
| Fastening bolt hole type | Plain |
| Standout of end cover | 33 |
| Thread of grease fitting | 1/4-28 SAE-LT |
| Axial offset of dowel pins | 35.5 |
| Axial position of the housing thread | 28.5 |
| Housing thread for grease fitting | 1/4-28 UNF |
| Depth of centring recess | 3.2 |
| UNSPSC code | 31171536 |
|---|---|
| EClass code | 23-05-08-02 |