Cuscinetti orientabili a rulli011BS222142RS/GFP9VA944
CUSCINETTO SKF BS2-2214-2RS/GFP9VA944
Cuscinetti orientabili a rulli · 70 × 125 × 38 mm
Description
SKF Food line spherical roller bearings are compliant with food safety regulations. Designed with food grade seals and grease, they enhance food safety, increase reliability and support sustainable development. Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature.
- Compliant with food safety regulations
- Accommodate misalignment up to 0.5 degree
- High load carrying capacity
- Sealed for increased reliability, with relubrication features
- Low friction and long service life
- Increased wear resistance
Key data
Cuscinetti orientabili a rulli- Bore diameter
- 70mm
- Outside diameter
- 125mm
- Width
- 38mm
- Basic dynamic load rating
- 213kN
- Basic static load rating
- 228kN
- Limiting speed
- 310r/min
Item details
- Item
- 011BS222142RS/GFP9VA944
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
46 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 70mm |
|---|---|
| Outside diameter | 125mm |
| Width | 38mm |
| Radius of fillet (max.) | 1.5mm |
| Diameter of housing abutment (max.) | 116mm |
| Diameter of shaft abutment (min.) | 79mm |
| Chamfer dimension (min.) | 1.5mm |
| Deviation limits of mid-range bore diameter | -0.015 … 0mm |
| Deviation limits of mid-range outside diameter | -0.018 … 0mm |
| Deviation limits of ring width | -0.06 … 0mm |
| Shoulder diameter of inner ring ≈ | 80.1mm |
| Shoulder/recess diameter of outer ring ≈ | 116mm |
| Diameter of lubrication hole | 3mm |
| Width of lubrication groove | 6mm |
| Diameter of shaft abutment (max.) | 80mm |
| Basic dynamic load rating | 213kN |
|---|---|
| Basic static load rating | 228kN |
| Limiting speed | 310r/min |
| Fatigue load limit | 25.5kN |
| Sealing | Seal on both sides |
|---|---|
| Radial internal clearance | CN |
| Cage | Sheet metal |
| Bore type | Cylindrical |
| Lubricant | Food grade grease |
| Number of rows | 2 |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | With |
| Performance class | SKF Explorer |
| Sealing type | Contact |
| ISO tolerance class for dimensions | Normal |
|---|---|
| ISO tolerance class for geometrical tolerances | P5 |
| Range of section height at outer ring of assembled bearing | 11µm |
| Range of section height at inner ring of assembled bearing | 5µm |
| Tolerance class for run-out | P5 |
| Tolerance class for dimensions | Normal |
| Maximum run-out of inner ring side face to the bore | 8µm |
| Perpendicularity of outer ring outside surface | 5µm |
| Maximum initial clearance | 80µm |
| Minimum initial clearance | 50µm |
| Calculation factor | 4.4 |
|---|---|
| Calculation factor | 2.9 |
| Calculation factor | 2.8 |
| Limiting value | 0.23 |
| UNSPSC code | 31171510 |
|---|---|
| EClass code | 23-05-09-11 |
| Indicative carbon footprint for new product | 6.8kg CO2e |