Cuscinetti obliqui a sfere0117316BECBM
CUSCINETTO SKF 7316 BECBM
Cuscinetti obliqui a sfere · 80 × 170 × 39 mm
Description
These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.
- High-speed capability
- Accommodate relatively high radial loads and large unilateral axial loads
Key data
Cuscinetti obliqui a sfere- Bore diameter
- 80mm
- Outside diameter
- 170mm
- Width
- 39mm
- Basic dynamic load rating
- 143kN
- Basic static load rating
- 118kN
- Limiting speed
- 6,700r/min
Item details
- Item
- 0117316BECBM
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
51 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 80mm |
|---|---|
| Outside diameter | 170mm |
| Width | 39mm |
| Radius of fillet (max.) | 2mm |
| Diameter of housing abutment (max.) | 158mm |
| Diameter of shaft abutment (min.) | 92mm |
| Chamfer dimension (min.) | 2.1mm |
| Deviation limits of mid-range bore diameter | -0.012 … 0mm |
| Deviation limits of mid-range outside diameter | -0.018 … 0mm |
| Deviation limits of ring width | -0.15 … 0mm |
| Diameter of housing abutment (max.) | 163mm |
| Radius of fillet (max.) | 1mm |
| Basic dynamic load rating | 143kN |
|---|---|
| Basic static load rating | 118kN |
| Limiting speed | 6,700r/min |
| Reference speed | 5,000r/min |
| Fatigue load limit | 4.5kN |
| Distance side face to pressure point | 72mm |
| Sealing | Without |
|---|---|
| Cage | Machined brass |
| Material, bearing | Bearing steel |
| Lubricant | None |
| Number of rows | 1 |
| Contact angle | 40° |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | Without |
| Coating | Without |
| Performance class | SKF Explorer |
| Matched arrangement | No |
| Axial internal clearance | Not applicable |
| Contact type | Contatto normale (due punti di contatto) |
| Ring type | Anello interno e anelli esterni monoblocco |
| Matched condition (axial clearance/ preload) | Gioco assiale CB |
| Tolerance class | Class 6 (P6) |
|---|---|
| ISO tolerance class for dimensions | P6 |
| ISO tolerance class for geometrical tolerances | P5 |
| Range of section height at outer ring of assembled bearing | 13µm |
| Range of section height at inner ring of assembled bearing | 5µm |
| Maximum run-out of inner ring side face to the bore | 8µm |
| Perpendicularity of outer ring outside surface | 5µm |
| Limiting value | 1.1 |
|---|---|
| Calculation factor (back-to-back, face-to-face) | 0.57 |
| Calculation factor (back-to-back, face-to-face) | 0.52 |
| Calculation factor (back-to-back, face-to-face) | 0.55 |
| Calculation factor (back-to-back, face-to-face) | 0.93 |
| Calculation factor (single, tandem) | 0.35 |
| Calculation factor (single, tandem) | 0.26 |
| Calculation factor (single, tandem) | 0.57 |
| UNSPSC code | 31171531 |
|---|---|
| EClass code | 23-05-08-03 |
| Indicative carbon footprint for new product | 14.9kg CO2e |