Cuscinetti radiali a sfere011618/5
CUSCINETTO SKF 618/5 (AX5)
Cuscinetti radiali a sfere · 5 × 11 × 3 mm
Description
Single row deep groove ball bearings are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
- Simple, versatile and robust design
- Low friction
- High-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
Key data
Cuscinetti radiali a sfere- Bore diameter
- 5mm
- Outside diameter
- 11mm
- Width
- 3mm
- Basic dynamic load rating
- 0.468kN
- Basic static load rating
- 0.143kN
- Limiting speed
- 75,000r/min
Item details
- Item
- 011618/5
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
36 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 5mm |
|---|---|
| Outside diameter | 11mm |
| Width | 3mm |
| Diameter of housing abutment (max.) | 10.2mm |
| Diameter of shaft abutment (min.) | 5.8mm |
| Chamfer dimension (min.) | 0.15mm |
| Deviation limits of mid-range bore diameter | -0.007 … 0mm |
| Deviation limits of mid-range outside diameter | -0.007 … 0mm |
| Deviation limits of ring width | -0.12 … 0mm |
| Shoulder diameter ≈ | 6.81mm |
| Radius of shaft or housing fillet (max.) | 0.1mm |
| Basic dynamic load rating | 0.468kN |
|---|---|
| Basic static load rating | 0.143kN |
| Limiting speed | 75,000r/min |
| Reference speed | 120,000r/min |
| Fatigue load limit | 0.006kN |
| Sealing | Without |
|---|---|
| Radial internal clearance | CN |
| Bore type | Cylindrical |
| Material, bearing | Bearing steel |
| Lubricant | None |
| Number of rows | 1 |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | Without |
| Coating | Without |
| Matched arrangement | No |
| Filling slots | Without |
| Minimum load factor | 0.015 |
| ISO tolerance class for dimensions | P6 |
|---|---|
| ISO tolerance class for geometrical tolerances | P6 |
| Range of section height at outer ring of assembled bearing | 8µm |
| Range of section height at inner ring of assembled bearing | 6µm |
| Calculation factor | 7.1 |
|---|
| UNSPSC code | 31171504 |
|---|---|
| EClass code | 23-05-08-01 |
| Indicative carbon footprint for new product | 0.006kg CO2e |