CUSCINETTO SKF 6004-2Z VA 201
Cuscinetti radiali a sfere · 20 × 42 × 12 mm
Description
Single row deep groove ball bearings for high temperature applications, with shields on both sides, are designed for challenging operating conditions, with certain variants being capable of performing at temperatures as high as 350 °C (660 °F). They have larger radial internal clearances and use graphite-based lubricants that enable operation at high temperatures. They are lubricated for the life of the bearing and the entire surface of the bearings and shields are manganese phosphate treated, which enhances adhesion of the lubricant to the metal and improves their running-in properties. As with deep groove ball bearings generally, they are particularly versatile, accommodate radial and axial loads in both directions, and are easy to mount. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
- Optimized for operation at high temperatures – up to 350 °C (660 °F)
- Easily swapped with grease-lubricated bearings of corresponding ISO dimensions
- Increased reliability, reduced complexity and decreased environmental impact
- Integral sealing prolongs bearing service life
- Typical benefits of single row deep groove ball bearings
Key data
Cuscinetti radiali a sfere- Bore diameter
- 20mm
- Outside diameter
- 42mm
- Width
- 12mm
- Basic static load rating
- 5kN
- Limiting speed
- 140r/min
- Radius of fillet (max.)
- 0.6mm
Item details
- Item
- 01160042ZVA201
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
27 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 20mm |
|---|---|
| Outside diameter | 42mm |
| Width | 12mm |
| Radius of fillet (max.) | 0.6mm |
| Diameter of housing abutment (max.) | 38.8mm |
| Diameter of shaft abutment (min.) | 23.2mm |
| Chamfer dimension (min.) | 0.6mm |
| Shoulder diameter inner ring ≈ | 27.13mm |
| Diameter of shaft abutment (max.) | 27.1mm |
| Basic static load rating | 5kN |
|---|---|
| Limiting speed | 140r/min |
| Sealing | Shield on both sides |
|---|---|
| Radial internal clearance | Multiples of C5 |
| Cage | Sheet metal |
| Bore type | Cylindrical |
| Material, bearing | High temperature steel |
| Lubricant | Solid lubricant |
| Number of rows | 1 |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | Without |
| Coating | Coated |
| Matched arrangement | No |
| Filling slots | Without |
| Sealing type | Non-contact |
| UNSPSC code | 31171504 |
|---|---|
| EClass code | 23-05-90-90 |
| Indicative carbon footprint for new product | 0.26kg CO2e |