Cuscinetti radiali a sfere01160022RSVA947
CUSCINETTO SKF 6002-2RSH/VA947
Cuscinetti radiali a sfere · 15 × 32 × 9 mm
Description
SKF Food line deep groove ball bearings are compliant with food safety regulations. Designed with food grade seals and grease, they enhance food safety, increase reliability and support sustainable development in non-corrosive environments (VA947). Single row deep groove ball bearings with seals are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
- Compliant with food safety regulations
- Simple, versatile and robust design
- Low friction and high-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
Key data
Cuscinetti radiali a sfere- Bore diameter
- 15mm
- Outside diameter
- 32mm
- Width
- 9mm
- Basic dynamic load rating
- 5.85kN
- Basic static load rating
- 2.85kN
- Limiting speed
- 14,000r/min
Item details
- Item
- 01160022RSVA947
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
31 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 15mm |
|---|---|
| Outside diameter | 32mm |
| Width | 9mm |
| Diameter of housing abutment (max.) | 30mm |
| Diameter of shaft abutment (min.) | 17mm |
| Chamfer dimension (min.) | 0.3mm |
| Radius of shaft or housing fillet (max.) | 0.3mm |
| Diameter of shaft abutment (max.) | 18.5mm |
| Basic dynamic load rating | 5.85kN |
|---|---|
| Basic static load rating | 2.85kN |
| Limiting speed | 14,000r/min |
| Fatigue load limit | 0.12kN |
| Sealing | Seal on both sides |
|---|---|
| Radial internal clearance | CN |
| Cage | Sheet metal |
| Bore type | Cylindrical |
| Material, bearing | Bearing steel |
| Lubricant | Food grade grease |
| Number of rows | 1 |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | Without |
| Coating | Without |
| Performance class | SKF Explorer |
| Matched arrangement | No |
| Filling slots | Without |
| Minimum load factor | 0.025 |
| Sealing type | Contact |
| Calculation factor | 13.9 |
|---|
| UNSPSC code | 31171504 |
|---|---|
| EClass code | 23-05-08-01 |
| Indicative carbon footprint for new product | 0.11kg CO2e |