CUSCINETTO SKF 6000 2RSLTN9/HC5C3WT
Cuscinetti radiali a sfere · 10 × 26 × 8 mm
Description
Hybrid ceramic single row deep groove ball bearings with low-friction seals on both sides have rings made of bearing steel and rolling elements made of bearing grade silicon nitride, which make the bearings electrically insulating. The low-friction seals provide better sealing effectiveness than shields and non-contact seals, thus providing significantly prolonged bearing service life, yet they can still operate at the same speeds as shields. The ceramic rolling elements not only provide protection from electric current damage but also, when compared to same-sized bearings with steel rolling elements, provide enhanced bearing performance, extended bearing service life, higher speed capability, high wear-resistance, high bearing stiffness, reduced risk of smearing and false brinelling and less sensitivity to temperature gradients, making them suitable for use in dificult conditions and contaminated environments. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
- Protected against electric current damage
- Especially suited for use in difficult conditions and contaminated environments
- Typical benefits of single row deep groove ball bearings
Key data
Cuscinetti radiali a sfere- Bore diameter
- 10mm
- Outside diameter
- 26mm
- Width
- 8mm
- Basic dynamic load rating
- 4.62kN
- Basic static load rating
- 1.96kN
- Limiting speed
- 34,000r/min
Item details
- Item
- 01160002RSLTN9HC5C3WT
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
30 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 10mm |
|---|---|
| Outside diameter | 26mm |
| Width | 8mm |
| Radius of fillet (max.) | 0.3mm |
| Diameter of housing abutment (max.) | 24mm |
| Diameter of shaft abutment (min.) | 12mm |
| Chamfer dimension (min.) | 0.3mm |
| Diameter of shaft abutment (max.) | 12.5mm |
| Basic dynamic load rating | 4.62kN |
|---|---|
| Basic static load rating | 1.96kN |
| Limiting speed | 34,000r/min |
| Fatigue load limit | 0.061kN |
| Sealing | Seal on both sides |
|---|---|
| Radial internal clearance | C3 |
| Cage | Non-metallic |
| Bore type | Cylindrical |
| Material, bearing | Hybrid (ceramic balls) |
| Lubricant | Grease |
| Number of rows | 1 |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | Without |
| Coating | Without |
| Matched arrangement | No |
| Filling slots | Without |
| Sealing type | Low-friction |
| Calculation factor | 0.025 |
|---|---|
| Calculation factor | 12.4 |
| UNSPSC code | 31171504 |
|---|---|
| EClass code | 23-05-08-01 |
| Indicative carbon footprint for new product | 0.06kg CO2e |