Cuscinetti obliqui a sfere0113216
CUSCINETTO SKF 3216 A GABBIA ACC.
Cuscinetti obliqui a sfere · 80 × 140 × 44.4 mm
Description
Double row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. They can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.
- High-speed capability
- Accommodate relatively high radial loads, high axial loads in both directions and tilting moments
- Suitable where a stiff bearing arrangement is required
- Require less axial space than equivalent pair of single row angular contact ball bearings
Key data
Cuscinetti obliqui a sfere- Bore diameter
- 80mm
- Outside diameter
- 140mm
- Width
- 44.4mm
- Basic dynamic load rating
- 106kN
- Basic static load rating
- 95kN
- Limiting speed
- 4,300r/min
Item details
- Item
- 0113216
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
32 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 80mm |
|---|---|
| Outside diameter | 140mm |
| Width | 44.4mm |
| Radius of fillet (max.) | 2mm |
| Diameter of housing abutment (max.) | 129mm |
| Diameter of shaft abutment (min.) | 91mm |
| Shoulder diameter outer ring ≈ | 126.19mm |
| Shoulder diameter inner ring ≈ | 97.66mm |
| Basic dynamic load rating | 106kN |
|---|---|
| Basic static load rating | 95kN |
| Limiting speed | 4,300r/min |
| Reference speed | 5,000r/min |
| Fatigue load limit | 3.9kN |
| Sealing | Without |
|---|---|
| Cage | Sheet metal |
| Material, bearing | Bearing steel |
| Lubricant | None |
| Number of rows | 2 |
| Contact angle | 30° |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | Without |
| Coating | Without |
| Matched arrangement | No |
| Arrangement of contact angle (double-row bearing) | Back-to-back (O) |
| Calculation factor | 1.2 |
|---|---|
| Calculation factor | 0.78 |
| Calculation factor | 0.66 |
| Limiting value | 0.8 |
| Calculation factor | 0.06 |
| UNSPSC code | 31171531 |
|---|---|
| EClass code | 23-05-08-03 |
| Indicative carbon footprint for new product | 7.9kg CO2e |