Cuscinetti obliqui a sfere0113210A2RS
CUSCINETTO SKF 3210 A-2RS1/MT33
Cuscinetti obliqui a sfere · 50 × 90 × 30.2 mm
Description
Double row angular contact ball bearings, with seals or shields, correspond to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. Depending on the sealing execution, they can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.
- High-speed capability
- Accommodate relatively high radial loads, high axial loads in both directions and tilting moments
- Suitable where a stiff bearing arrangement is required
- Require less axial space than equivalent pair of single row angular contact ball bearings
- Integral sealing prolongs bearing service life
Key data
Cuscinetti obliqui a sfere- Bore diameter
- 50mm
- Outside diameter
- 90mm
- Width
- 30.2mm
- Basic dynamic load rating
- 51kN
- Basic static load rating
- 42.5kN
- Limiting speed
- 4,800r/min
Item details
- Item
- 0113210A2RS
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
22 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 50mm |
|---|---|
| Outside diameter | 90mm |
| Width | 30.2mm |
| Basic dynamic load rating | 51kN |
|---|---|
| Basic static load rating | 42.5kN |
| Limiting speed | 4,800r/min |
| Sealing | Seal on both sides |
|---|---|
| Cage | Sheet metal |
| Material, bearing | Bearing steel |
| Lubricant | Grease |
| Number of rows | 2 |
| Contact angle | 30° |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | Without |
| Coating | Without |
| Performance class | SKF Explorer |
| Matched arrangement | No |
| Sealing type | Contact |
| Arrangement of contact angle (double-row bearing) | Back-to-back (O) |
| UNSPSC code | 31171531 |
|---|---|
| EClass code | 23-05-08-03 |
| Indicative carbon footprint for new product | 2.5kg CO2e |