Cuscinetti orientabili a rulli01124192ECA
CUSCINETTO SKF 24192 ECA/W33
Cuscinetti orientabili a rulli · 460 × 760 × 300 mm
Description
Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
- Accommodate misalignment
- High load carrying capacity
- Relubrication features
- Low friction and long service life
- Increased wear resistance
Key data
Cuscinetti orientabili a rulli- Bore diameter
- 460mm
- Outside diameter
- 760mm
- Width
- 300mm
- Basic dynamic load rating
- 8,608kN
- Basic static load rating
- 14,600kN
- Limiting speed
- 430r/min
Item details
- Item
- 01124192ECA
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
45 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 460mm |
|---|---|
| Outside diameter | 760mm |
| Width | 300mm |
| Radius of fillet (max.) | 6mm |
| Diameter of housing abutment (max.) | 728mm |
| Diameter of shaft abutment (min.) | 492mm |
| Chamfer dimension (min.) | 7.5mm |
| Deviation limits of mid-range bore diameter | -0.045 … 0mm |
| Deviation limits of mid-range outside diameter | -0.075 … 0mm |
| Deviation limits of ring width | -0.45 … 0mm |
| Shoulder diameter of inner ring ≈ | 543mm |
| Shoulder/recess diameter of outer ring ≈ | 649mm |
| Diameter of lubrication hole | 12mm |
| Width of lubrication groove | 22.3mm |
| Basic dynamic load rating | 8,608kN |
|---|---|
| Basic static load rating | 14,600kN |
| Limiting speed | 430r/min |
| Reference speed | 280r/min |
| Fatigue load limit | 980kN |
| Sealing | Without |
|---|---|
| Radial internal clearance | CN |
| Cage | Machined brass |
| Bore type | Cylindrical |
| Lubricant | None |
| Number of rows | 2 |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | With |
| Performance class | SKF Explorer |
| Candidate for remanufacturing | Yes |
| ISO tolerance class for dimensions | Normal |
|---|---|
| ISO tolerance class for geometrical tolerances | Normal |
| Range of section height at outer ring of assembled bearing | 120µm |
| Range of section height at inner ring of assembled bearing | 65µm |
| Tolerance class for run-out | Normal |
| Tolerance class for dimensions | Normal |
| Maximum initial clearance | 410µm |
| Minimum initial clearance | 260µm |
| Calculation factor | 2.7 |
|---|---|
| Calculation factor | 1.8 |
| Calculation factor | 1.8 |
| Limiting value | 0.37 |
| UNSPSC code | 31171510 |
|---|---|
| EClass code | 23-05-09-11 |
| Indicative carbon footprint for new product | 1,983kg CO2e |
| Indicative carbon footprint for remanufactured product | 659kg CO2e |