Cuscinetti orientabili a rulli011231222CS
CUSCINETTO SKF 23122-2CS5/VT143
Cuscinetti orientabili a rulli · 110 × 180 × 56 mm
Description
Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. Under normal operating conditions, sealed bearings are almost maintenance-free, keeping service costs and grease consumption low. The design includes features to facilitate relubrication. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
- Accommodate misalignment up to 0.5 degree
- High load carrying capacity
- Sealed for increased reliability, with relubrication features
- Low friction and long service life
- Increased wear resistance
Key data
Cuscinetti orientabili a rulli- Bore diameter
- 110mm
- Outside diameter
- 180mm
- Width
- 56mm
- Basic dynamic load rating
- 451kN
- Basic static load rating
- 585kN
- Limiting speed
- 1,100r/min
Item details
- Item
- 011231222CS
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
48 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 110mm |
|---|---|
| Outside diameter | 180mm |
| Width | 56mm |
| Radius of fillet (max.) | 2mm |
| Diameter of housing abutment (max.) | 169mm |
| Diameter of shaft abutment (min.) | 121mm |
| Chamfer dimension (min.) | 2mm |
| Deviation limits of mid-range bore diameter | -0.02 … 0mm |
| Deviation limits of mid-range outside diameter | -0.025 … 0mm |
| Deviation limits of ring width | -0.08 … 0mm |
| Shoulder diameter of inner ring ≈ | 122mm |
| Shoulder/recess diameter of outer ring ≈ | 166mm |
| Diameter of lubrication hole | 4.5mm |
| Width of lubrication groove | 8.3mm |
| Diameter of shaft abutment (max.) | 122mm |
| Basic dynamic load rating | 451kN |
|---|---|
| Basic static load rating | 585kN |
| Limiting speed | 1,100r/min |
| Fatigue load limit | 61kN |
| Sealing | Seal on both sides |
|---|---|
| Radial internal clearance | CN |
| Cage | Sheet metal |
| Bore type | Cylindrical |
| Lubricant | Grease |
| Number of rows | 2 |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | With |
| Performance class | SKF Explorer |
| Sealing type | Contact |
| Candidate for remanufacturing | Yes |
| ISO tolerance class for dimensions | Normal |
|---|---|
| ISO tolerance class for geometrical tolerances | P5 |
| Range of section height at outer ring of assembled bearing | 13µm |
| Range of section height at inner ring of assembled bearing | 6µm |
| Tolerance class for run-out | P5 |
| Tolerance class for dimensions | Normal |
| Maximum run-out of inner ring side face to the bore | 9µm |
| Perpendicularity of outer ring outside surface | 5µm |
| Maximum initial clearance | 120µm |
| Minimum initial clearance | 75µm |
| Calculation factor | 3.7 |
|---|---|
| Calculation factor | 2.5 |
| Calculation factor | 2.5 |
| Limiting value | 0.27 |
| UNSPSC code | 31171510 |
|---|---|
| EClass code | 23-05-09-11 |
| Indicative carbon footprint for new product | 19.6kg CO2e |
| Indicative carbon footprint for remanufactured product | 6.5kg CO2e |