Cuscinetti orientabili a sfere01123052RS
CUSCINETTO SKF 2305 E-2RS1TN9
Cuscinetti orientabili a sfere · 25 × 62 × 24 mm
Description
Self-aligning ball bearings, with seals on both sides, have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Accommodate static and dynamic misalignment
- Excellent high-speed performance
- Excellent light load performance
- Low friction
- Integral sealing results in reduced maintenance requirements and prolonged bearing service life
Key data
Cuscinetti orientabili a sfere- Bore diameter
- 25mm
- Outside diameter
- 62mm
- Width
- 24mm
- Basic dynamic load rating
- 19kN
- Basic static load rating
- 5.4kN
- Limiting speed
- 7,500r/min
Item details
- Item
- 01123052RS
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
37 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 25mm |
|---|---|
| Outside diameter | 62mm |
| Width | 24mm |
| Radius of fillet (max.) | 1.1mm |
| Diameter of housing abutment (max.) | 55mm |
| Diameter of shaft abutment (min.) | 32mm |
| Chamfer dimension (min.) | 1.1mm |
| Diameter of shaft abutment (max.) | 32.5mm |
| Recess diameter outer ring ≈ | 52.7mm |
| Recess diameter inner ring ≈ | 32.8mm |
| Basic dynamic load rating | 19kN |
|---|---|
| Basic static load rating | 5.4kN |
| Limiting speed | 7,500r/min |
| Reference speed | 22,000r/min |
| Fatigue load limit | 0.28kN |
| Sealing | Seal on both sides |
|---|---|
| Radial internal clearance | CN |
| Cage | Non-metallic |
| Bore type | Cylindrical |
| Material, bearing | Bearing steel |
| Lubricant | Grease |
| Number of rows | 2 |
| Locating feature, bearing outer ring | Without |
| Permissible angular misalignment | 1.5° |
| Relubrication feature | Without |
| Coating | Without |
| Retaining feature, inner ring | None |
| Sealing type | Contact |
| Tolerance class | Normal |
|---|
| Calculation factor | 3.5 |
|---|---|
| Calculation factor | 2.2 |
| Calculation factor | 2.5 |
| Limiting value | 0.28 |
| Calculation factor | 0.05 |
| UNSPSC code | 31171532 |
|---|---|
| EClass code | 23-05-08-06 |
| Indicative carbon footprint for new product | 1.3kg CO2e |