Cuscinetti orientabili a rulli01123032C
CUSCINETTO SKF 23032 CC/ W33
Cuscinetti orientabili a rulli · 160 × 240 × 60 mm
Description
Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.
- Accommodate misalignment
- High load carrying capacity
- Relubrication features
- Low friction and long service life
- Increased wear resistance
Key data
Cuscinetti orientabili a rulli- Bore diameter
- 160mm
- Outside diameter
- 240mm
- Width
- 60mm
- Basic dynamic load rating
- 614kN
- Basic static load rating
- 880kN
- Limiting speed
- 3,000r/min
Item details
- Item
- 01123032C
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
47 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 160mm |
|---|---|
| Outside diameter | 240mm |
| Width | 60mm |
| Radius of fillet (max.) | 2mm |
| Diameter of housing abutment (max.) | 229mm |
| Diameter of shaft abutment (min.) | 171mm |
| Chamfer dimension (min.) | 2.1mm |
| Deviation limits of mid-range bore diameter | -0.025 … 0mm |
| Deviation limits of mid-range outside diameter | -0.03 … 0mm |
| Deviation limits of ring width | -0.08 … 0mm |
| Shoulder diameter of inner ring ≈ | 180mm |
| Shoulder/recess diameter of outer ring ≈ | 217mm |
| Diameter of lubrication hole | 6mm |
| Width of lubrication groove | 11.1mm |
| Basic dynamic load rating | 614kN |
|---|---|
| Basic static load rating | 880kN |
| Limiting speed | 3,000r/min |
| Reference speed | 2,400r/min |
| Fatigue load limit | 83kN |
| Sealing | Without |
|---|---|
| Radial internal clearance | CN |
| Cage | Sheet metal |
| Bore type | Cylindrical |
| Lubricant | None |
| Number of rows | 2 |
| Locating feature, bearing outer ring | Without |
| Relubrication feature | With |
| Performance class | SKF Explorer |
| Candidate for remanufacturing | Yes |
| ISO tolerance class for dimensions | Normal |
|---|---|
| ISO tolerance class for geometrical tolerances | P5 |
| Range of section height at outer ring of assembled bearing | 15µm |
| Range of section height at inner ring of assembled bearing | 8µm |
| Tolerance class for run-out | P5 |
| Tolerance class for dimensions | Normal |
| Maximum run-out of inner ring side face to the bore | 10µm |
| Perpendicularity of outer ring outside surface | 5.5µm |
| Maximum initial clearance | 170µm |
| Minimum initial clearance | 110µm |
| Calculation factor | 4.6 |
|---|---|
| Calculation factor | 3 |
| Calculation factor | 2.8 |
| Limiting value | 0.22 |
| UNSPSC code | 31171510 |
|---|---|
| EClass code | 23-05-09-11 |
| Indicative carbon footprint for new product | 33.8kg CO2e |
| Indicative carbon footprint for remanufactured product | 11.2kg CO2e |