Cuscinetti orientabili a sfere01122052RSK
CUSCINETTO SKF 2205 E-2RS1KTN9
Cuscinetti orientabili a sfere · 25 × 52 × 18 mm
Description
Self-aligning ball bearings, with a tapered bore and seals on both sides, have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are insensitive to angular misalignment of the shaft relative to the housing. The tapered bore facilitates ease of mounting via adapter/withdrawal sleeves. The integral sealing can prolong bearing service life by keeping lubricant in the bearings and contaminants out.
- Ease of mounting via adapter/withdrawal sleeves
- Accommodate static and dynamic misalignment
- Excellent high-speed and light load performance
- Low friction
- Integral sealing results in reduced maintenance requirements and prolonged bearing service life
Key data
Cuscinetti orientabili a sfere- Bore diameter
- 25mm
- Outside diameter
- 52mm
- Width
- 18mm
- Basic dynamic load rating
- 14.3kN
- Basic static load rating
- 4kN
- Limiting speed
- 9,000r/min
Item details
- Item
- 01122052RSK
- Category
- A.01.01
- Unit of measure
- PZ
Technical specifications
35 specifications · highlighted (yellow border): used as catalog filters
| Bore diameter | 25mm |
|---|---|
| Outside diameter | 52mm |
| Width | 18mm |
| Radius of fillet (max.) | 1mm |
| Diameter of housing abutment (max.) | 46.4mm |
| Chamfer dimension (min.) | 1mm |
| Recess diameter outer ring ≈ | 46.21mm |
| Recess diameter inner ring ≈ | 31mm |
| Basic dynamic load rating | 14.3kN |
|---|---|
| Basic static load rating | 4kN |
| Limiting speed | 9,000r/min |
| Reference speed | 26,000r/min |
| Fatigue load limit | 0.204kN |
| Sealing | Seal on both sides |
|---|---|
| Radial internal clearance | CN |
| Cage | Non-metallic |
| Bore type | Tapered 1:12 |
| Material, bearing | Bearing steel |
| Lubricant | Grease |
| Number of rows | 2 |
| Locating feature, bearing outer ring | Without |
| Permissible angular misalignment | 1.5° |
| Relubrication feature | Without |
| Coating | Without |
| Retaining feature, inner ring | None |
| Sealing type | Contact |
| Tolerance class | Normal |
|---|
| Calculation factor | 3.5 |
|---|---|
| Calculation factor | 2.2 |
| Calculation factor | 2.5 |
| Limiting value | 0.28 |
| Calculation factor | 0.045 |
| UNSPSC code | 31171532 |
|---|---|
| EClass code | 23-05-08-06 |
| Indicative carbon footprint for new product | 0.57kg CO2e |